+86-510-87852861 Gewabin@163.com
Categories
Contact Us

Add: Industrial Concentration Zone(North) Of Wanshi Town, Yixing District, Wuxi, Jiangsu Province, China

Tel: +86-510-87852861

Fax: +86-510-87853861-801

Mob: +8613867612832

E-mail: Gewabin@163.com

Closed Circuit Cooling Towers

Closed circuit Cooling Tower also named Evaporative cooler. It is the type of cooling tower placed the heat exchange tube inner the tower to ensure the cooling effect by circulation of air, spray water and circulating water....

Send Inquiry Chat Now

Introduction

Closed circuit Cooling Tower also named Evaporative cooler. It is the type of cooling tower placed the heat exchange tube inner the tower to ensure the cooling effect by circulation of air, spray water and circulating water.

IFS2Z%$RLS_97H`(H68@YP7

Main Components

Coil

Made of high-quality seamless steel pipes. The coil unit are  made by SS-304/316L stainless steel. Maximum pressure of our coils could reach to 32Mpa.

Spray Pump

Sealed by top quality rotary no-limited machinery seal, no leaking, long lifecycle, small horse power, large flow volume, low noise and high performance.

Fan

Axial type;aluminum alloy propeller

Casing

SS-304/316L or imported Aluminum-zinc alloy plate, Mg-Al-zinc plate

Electric Water Treatment Device

Clear the circuit water, effectively avoid the scale forming on the surface of coils and PVC fills.

Removable Drift Eliminator

PVC material; Make sure that the water loss rate will be less than 0.002%

Cooling Tower Fill

100% Original Material PVC Infill, special design with great cooling effect


Closed Water Cooling Tower Advantage

1. Combination Closer approach to wet bulb temperature and reduce fouling improve process efficiency

2. Lower process temperatures ,less required space ,and lower energy consumption.

3. Through Systems Reduces environmental impact ,saving up to 95% of the cooling water .

4. Reduced installed Cost And Space Requirements Effectively combines the function of a cooling tower and heat exchanger into one piece of equipment ,reduce required piping and system complexity.

 

VS open cooling tower

Closed circuit cooling tower

1. The whole pipeline system is closed circulation, and the circulating water is distilled water, which can make the vacuum furnace heat exchanger and small pipelines not scale, pollute, or corrode, and almost make the vacuum furnace Double the life.

2. There is almost no water consumption in circulating water. The same type of equipment saves about 7,000 tons of water per year.

3. Low operating costs and low maintenance

Open cooling towers

1. It is necessary to excavate 1-2 20 cubic meters of groundwater pool. Due to the water drop and open head loss

2.the power consumption is more than that of closed towers. Two sets of pumps are needed, which consumes a lot of electricity.


Facilities and equipment

%5DR@DP%L(6R$Z_R%5XKY2J