Add: Industrial Concentration Zone(North) Of Wanshi Town, Yixing District, Wuxi, Jiangsu Province, China
The closed cooling tower will be exchanged by the cooling medium through the coil and the cooling water and air outside the tube to form a closed circulation system, which avoids the pollution caused by the contact of the cooling medium with the air, thereby causing waste of the cooled medium and equipment. Failures such as blockages affect normal use....Send Inquiry Chat Now
The closed cooling tower will be exchanged by the cooling medium through the coil and the cooling water and air outside the tube to form a closed circulation system, which avoids the pollution caused by the contact of the cooling medium with the air, thereby causing waste of the cooled medium and equipment. Failures such as blockages affect normal use.
The structure of the cooler is of the coil type and the tube box type.
Unlike most forced draft cooling towers, the GWBB cooling tower utilizes large access doors for easy entry and exit.
All cooling towers are made of aluminum alloy axial flow fan, forward-inclined vane structure design, streamlined inlet air duct, small wind resistance, and low noise.
Long Life Construction
Rugged, corrosion-resistant galvanized steel is standard, and the S304 series stainless steel and Magnesium-plated aluminum-zinc plate housing is available as an optional upgrade to the partial or entire cooling tower structure.
ISO certified factories ensure high quality factory assembly.
Made of high-quality seamless steel pipes. The coil unit are made by SS-304/316L stainless steel. Maximum pressure of our coils could reach to 32Mpa.
Sealed by top quality rotary no-limited machinery seal, no leaking, long lifecycle, small horse power, large flow volume, low noise and high performance.
Axial type;aluminum alloy propeller
SS-304/316L or imported Aluminum-zinc alloy plate, Mg-Al-zinc plate
Electric Water Treatment Device
Clear the circuit water, effectively avoid the scale forming on the surface of coils and PVC fills.
Removable Drift Eliminator
PVC material; Make sure that the water loss rate will be less than 0.002%
Cooling Tower Fill
100% Original Material PVC Infill, special design with great cooling effect
1.The cooling water flow G=m3/h
2.The temperature of inlet cooling tower T1=℃
3.The temperature of outlet cooling tower T2=℃
4.The calculation wet bulb temperature of installation location T=℃
The heat rejection calculation of closed cooling tower
It can be used in air conditioners, instrumentation, metallurgical intermediate frequency electric furnaces, converters, power plant generator sets, steam turbine nuclear power plants, substations, chemical, pharmaceutical, welding, aluminum, copper foil cooling oil, large hydraulic machinery hydraulic oil Used in industrial manufacturing fields.