+86-510-87852861 Gewabin@163.com
Categories
Contact Us

Add: Industrial Concentration Zone(North) Of Wanshi Town, Yixing District, Wuxi, Jiangsu Province, China

Tel: +86-510-87852861

Fax: +86-510-87853861-801

Mob: +8613867612832

E-mail: Gewabin@163.com

Cross Flow Evaporative Condenser

Heat Transfer Evaporative Condenser

Heat transfer Evaporative Condenser Introduction Heat transfer Evaporative Condenser is one of the most important parts of the whole refrigeration system. The condenser condenses the refrigerant gas inside the coil and complete a heat exchange circle. The evaporative condenser is widely applied......

Send Inquiry Chat Now

Heat transfer Evaporative Condenser Introduction

Heat transfer Evaporative Condenser is one of the most important parts of the whole refrigeration system. The condenser condenses the refrigerant gas inside the coil and complete a heat exchange circle. The evaporative condenser is widely applied to cold storage, ice-store, chemical industry, supermarket and etc.

image001(001).jpg


Advantage of Heat transfer Evaporative Condenser

★ Energy saving,Water saving,Spare saving

★ Suitable for industrial process applications

★ High tightness of upper and lower box assembly without gasket cement


Heat transfer Evaporative Condenser Details

★ condenser coil

★ propeller fan

★ water pump

Water Distribution System

★ PVC fll

★ PVC Drift Eliminators

★ Electronicwater-curing Device

image003(001).jpg


Name

Introduction

1.Condensing coil

1.Material:high-quality seamless steel tube Φ25mm(GB/T8163)

2.The design pressure :1.97Mpa

3.Integrated hot dip galvanizing of condensing coil can enhanced corrosion resistance.

2.Propeller Fan

1.Protection:class:IP55,insulation class:F.

2. Advantage:high blowing rate,low damping,low noises,good perormance and high efficiency.

3. Water Pump

1.Motor brand:Siemens 1.The Water pump uses a high-quality mechanical seal that is not limited by the steering

2.Motor:special outdoor type motor,the advantage of the motor is low power,high flow,low noise.

4. Water Distribution System

1.Spray nozzle remains clog free while providing even and constant water distribution,providing the industry's best performing

2.Non-corrosive, maintenance-free water distribution system

3.Provides furthest coil coverage to improve heat transfer

5. PVC Fill

1.Material:PVC honeycomb type stuffing.

2.Use:Extended water cooling time to improve the effect of cooling.

3.Adavantage:aging resistance,low wind resistance and deformation resistance.

6.PVC Drift Eliminators

1.Material:specially designed non-corroding PVC

2.Advantage:remove moisture effectively from the moist air .It ia convenient to disassemble.

7.Electronic water-curing Device

1.Works under 220V to antiscale and descale

2.Reduce the potential for sediment and algae formation inside tower


Quality control

1. Checking raw material before producing.

2. Checking one by one before the assembling

3. Checking one by one during the production

4. Have the random inspection before the delivery.


Why choose us ?

a. Extensive production experience: we are specialized in Evaporative condenser, Closed cooling tower with an experience over 10 years.

b. Complete production facilities, Our technicians will do regular scheduled maintenance on these machines to guarantee them work well.

c. High quality raw material: we mainly choose raw material from big steel factory, such as TPCO, BAO STEEL, SHA STEEL, which are best and largest raw material manufacturer in China.

1.jpg