+86-510-87852861 Gewabin@163.com
Contact Us

Add: Industrial Concentration Zone(North) Of Wanshi Town, Yixing District, Wuxi, Jiangsu Province, China

Tel: +86-510-87852861

Fax: +86-510-87853861-801

Mob: +8613867612832

E-mail: Gewabin@163.com

Home > Knowledge > Content
Assembly method and design requirements of stainless steel evaporative condenser
Dec 24, 2018

The stainless steel evaporative condenser includes a housing whose bottom is designed with its water receiving tray during the operation, and is installed in the housing from the top to the bottom in order to effectively block the flap, the fan, and the spray. The head group, a condensing coil provided with a refrigerant inlet and a refrigerant outlet.

The stainless steel evaporative condenser is provided with a water pump which is connected to the water receiving tray and the sprinkler head through its water pipe, and has an air inlet at the side of the casing, and the device is also installed with a water temperature sensor in the water receiving tray. An ambient temperature sensor located outside the housing, a controller and a cooling water heating device located in the water tray. The evaporative condenser does not freeze water in the water tray in a low temperature environment, and does not affect the normal operation of the next time and does not cause damage to the evaporative condenser.

The stainless steel evaporative condenser is mainly effective in adopting the assembly method of the upper and lower boxes. To a certain extent, it has the advantages of compact structure, small footprint, light weight and less connecting pipes, and the advantages of convenient installation, greatly reducing on-site construction and installation strength, reducing installation costs.