+86-510-87852861 Gewabin@163.com
Categories
Contact Us

Add: Industrial Concentration Zone(North) Of Wanshi Town, Yixing District, Wuxi, Jiangsu Province, China

Tel: +86-510-87852861

Fax: +86-510-87853861-801

Mob: +8613867612832

E-mail: Gewabin@163.com

Knowledge
Home > Knowledge > Content
Cooling effect and operation requirements of industrial air cooled evaporative condenser
Dec 05, 2018

Cooling effect and operation requirements of industrial air cooled evaporative condenser

The industrial air cooled evaporative condenser is provided with a collecting air bag on the condensing pipe set during the operation, so that the air and non-condensable gas in the refrigerant can be collected into the collecting air bag, and the air and the non-condensable gas are collected. Separated from the refrigerant and discharged by the air separator through the pipeline, the compressor discharge pressure can be greatly reduced, the compressor load can be reduced, power consumption can be saved, and electricity cost can be saved.

PVC heat exchanger for industrial air cooled evaporative condenser

industrial air cooled evaporative condensers are mainly made of high-efficiency PVC fillers. They have the advantages of small wind resistance, anti-aging and no deformation when used. When they are filled, large areas, water films, and traversing water flow ripples are formed. The water flow time is extended, so that the flowing air takes away the heat in the water and improves the cooling effect of the circulating water.

High efficiency dehydrator for industrial air cooled evaporative condenser

The PVC material dehydrator not only effectively prevents biochemical corrosion and erosion, but also effectively collects moisture in the moist air according to the unique curved surface form, so that the water drift rate is less than 0.001%.

https://www.gwbrefrigeration.com/