+86-510-87852861 Gewabin@163.com
Contact Us

Add: Industrial Concentration Zone(North) Of Wanshi Town, Yixing District, Wuxi, Jiangsu Province, China

Tel: +86-510-87852861

Fax: +86-510-87853861-801

Mob: +8613867612832

E-mail: Gewabin@163.com

Home > Knowledge > Content
Refrigeration and heat transfer effect of stainless steel evaporative condenser
Nov 19, 2018

The stainless steel evaporative condenser is the main heat exchange equipment in the refrigeration system. When it is used, the superheated high-pressure refrigerant gas discharged from the compressor in the refrigeration system passes through the condensing pipe in the evaporative condenser to make the high-temperature gaseous refrigerant. Heat exchange with spray water and air outside the drain. That is, the gaseous refrigerant gradually condenses into a liquid refrigerant from the top to the bottom after entering the discharge pipe from the upper port. The super-strong wind force of the supporting induced draft fan makes the spray water completely and evenly covered on the surface of the coil, which greatly improves the heat exchange effect.

The stainless steel evaporative condenser utilizes the vaporization of water to remove a large amount of heat from the wind. The water droplets in the hot gas are intercepted by the high-efficiency dehydrator, and the water that absorbs the heat is scattered into the heat exchange layer of the PVC water-spraying sheet. The flowing air is cooled, the temperature is lowered, the water tank is entered, and the circulating water pump continues to circulate. The moisture evaporated into the air is automatically replenished by the water level regulator.

Stainless steel evaporative condenser heat exchange tubes are available in various forms. Carbon steel hot dip galvanized tubes (also divided into round and elliptical tubes), aluminum alloy tubes, and stainless steel tubes (also divided into 314/316 round tubes) are commonly used. , wave take-over), among which carbon steel hot-dip galvanic evaporative condenser is the first product to be used.