Add: Industrial Concentration Zone(North) Of Wanshi Town, Yixing District, Wuxi, Jiangsu Province, China
The R717 ammonia evaporation condenser is the main heat exchange equipment in the refrigeration system. The principle of operation is that the superheated high-pressure refrigerant gas discharged from the compressor in the refrigeration system passes through, and the high-temperature gaseous refrigerant can be made in the process of operation. The shower water and air outside the pipe are exchanged for heat.
The gaseous refrigerant of the R717 ammonia evaporation condenser is directly condensed into a liquid refrigerant from top to bottom after entering the discharge pipe from the upper port. The super-strong wind force of the supporting induced draft fan makes the spray water completely and evenly covered on the surface of the coil, and the water borrows the wind potential, which greatly improves the heat exchange effect. The temperature of the spray water changes from partial to gaseous, and the latent heat of vaporization of the water takes away a large amount of heat from the wind. The water droplets in the hot gas are intercepted by the high-efficiency dehydrator, and the remaining heat-absorbing water is scattered to the PVC. In the heat exchange layer, the air flowing through is cooled, the temperature is lowered, and the water tank is entered, and then the circulating water pump continues to circulate. The moisture evaporated into the air is automatically replenished by the water level regulator.
R717 ammonia evaporation condenser The outer casing of the evaporative condenser is usually sprayed with galvanized sheet. After being corrosion-resistant, the aluminum-zinc plate is gradually sprayed. The latest use of aluminum-plated magnesium-zinc plate on the market. The plate has the characteristics of stainless steel, does not rust, looks good and is easy to process.